SmartZ FaceReco+
Face Recognition Terminal

8 Inches Dual Cameras Human Body Temperature Measurement Real Time Face Recognition Terminal

Main Features:

  • Support real time live detection
  • Support abnormal body temperature alert
  • Support data interface protocol docking
  • Support tracking of personnel movements under strong backlight conditions
  • Unique live face recognition algorithm to accurately recognize faces, face recognition time is less than 0.5s
  • Built-in domestic CPU
  • Using Linux operating system, better system stability
  • The camera uses H.265 Main Profile encoding, compatible with NVR and other storage devices through the ONVIF protocol
  • Support TF card storage, pictures are stored continuously for 1 year or longer (depends on TF card capacity)
  • Mean time between failures MTBF>50000 H
  • Support 24000 face matching library and 160,000 face recognition records
  • Rich interface protocol, support TCP/IP, UDP, RTP, RTSP, RTCP, HTTP, DNS, DDNS, DHCP, SMTP, UPNP, MQTT protocol, Windows/Linux
  • Built-in light sensor, automatically adjust the opening and closing of the fill light
  • Rich hardware interface (I/O, WG26, WG34, RJ45, USB)
  • 8-inch IPS full-view HD display, no streaking and delay
  • Support automatic gain control and automatic white balance
  • 3D noise reduction and fog-passing technology makes the monitoring picture under low illumination more clear and delicate
  • Support code stream and I frame interval setting
  • Support video area partial blocking
  • Support ROI coding
  • Support setting maximum exposure time
  • Support 2D noise reduction, 3D noise reduction
  • Support recording schedule time period and upload mode setting
  • Support video brightness, contrast, hue, saturation, gamma adjustment
  • Support setting the maximum auto exposure time
  • Support face intelligent exposure, face smart enhancement setting



2Power1DC12V IN
3USB1USB 2.0
4Switch Output1Switch output interface A+/B-
5Wiegand IN1vcc12V, GND, D0, D1
6 Wiegand OUT1 vcc12V, GND, D0, D1
7RS4851485-, 485+


  • The device should be used in a room with no ventilation and room temperature between 16 ℃ -40 ℃.
  • The temperature measurement accuracy will affect if people entering indoors from a cold outdoor environment.
  • Please warm the device up for 10 minutes before testing.
  • Please make sure that there is no heating source or air conditioning vent within 3 meters of the device.
  • Please do not exposure forehead under the situation such as showers, hair dryers, sprays, etc. It will affect the measurement.
  • The forehead temperature will be lower than the actual temperature if there is oil on the forehead, makeup, oxygen mask, or wrinkles in the elderly.
  • Please make sure there is no hair or clothing covering the area where the projection is located
  • SmartZ FaceReco+ is not a medical device and any confirmation of medical condition will require consultation from qualified personnel.


ProcessorDual Core Processor(Hi3516D V300)+ 1G memory + 16G flash
Operating SystemLinux Operating system
StorageSupport TF card storage
Viewing AngleVertical viewing angle: 30°; Horizontal viewing angle: 30°
Sensor1/2.8" Progressive Scan CMOS(IMX307)
SpeakerVoice playback content can be customized
Temperature Measurement Performance
Measurement Range16℃ - 40℃ (Indoor without wind)
Temperature Measurement Lens
European original lens
Sensors TypeInfrared Thermopile Medical-grade European imported sensors
Measurement Accuracy±0.3℃
Temperature resolution0.1℃
Temperature Measurement Distance≤30cm
Measurement Response Time300ms
1.2m ~2.2m, angle adjustable
Recognition Distance0.3m ~1.5m, depends on lens
Recognition TimeLess than 0.5s
Storage Capacity160,000 capture records
Face Capacity24000pcs
Screen Brightness≥400 cd/m2
Switching Output1 way switch output, other GPIO port can be customized
Network Interface1 RJ45 10M / 100M adaptive Ethernet port, Gigabit Ethernet port can be customized
Wiegand Interface1ch Wiegand interface input/output
RS485There is an RS485 interface on the PCB board, but no lead
USB Interface1ch USB interface
CameraDual cameras
Effective Pixels2MP, 1920*1080
Min IlluminationColor 0.01Lux @F1.2(ICR);B/W 0.001Lux @F1.2 (ICR)
WDR120db, ISP algorithm face partial exposure
Website ConfigurationSupport
Remote UpgradeSupport
Working Humidity0~90% relative humidity, no condensation
Salt Spraylevel Rp6 or above
Antistaticcontact ±6KV, air ±8KV
PowerDC12V/2A , 14.4W(MAX)
Column Aperture36mm
Equipment Size260 (L) * 136 (W) * 26 (T) mm
Screen Size8 inches IPS HD screen
Weight1.7 kg