USR-G809
USR-G809 Industrial LTE & IO Gateway Router
- Support VPN (PPTP, L2TP, IPSec, OpenVPN, GRE)
- 1.5KV network isolation transformer protection
- Static IEC61000-4-2, level 2
- Pulsed Electric Field IEC61000-4-4, level 2
- Surge IEC61000-4-5, level 2
- Hardware Watchdog
- Supports SMS, SMTP, NAT, DDNS, PPPOE, DHCP, Static IP
- Supports email alarm, SMS alarm, abnormal alarm push in time
- Extensive interfaces including 4 Ethernet ports, serial port
Rich hardware interface, suitable for multiple scenarios
Realize data transparent transmission, ModbusRTU and ModbusTCP conversion.
- With 1*RS232/RS485
- 2*DI switch input
- 2*DO control output
Abnormal alarm, monitoring at any time
Provides real-time monitoring of the statuses of routers, and immediate sending of SMS and email alarms when abnormalities occur. It can also drive the DO relay for emergency braking, which greatly guarantees safety.
VLAN division, independent subnet
- Improve network switching efficiency and ensure network stability
- Improve network security and avoid broadcast storms
- The network is more flexible, the data is safer, and overall operation is better safeguarded and smoother.
Data security, multiple VPN
G809 fully supports mainstream VPN protocols, including PPTP, L2TP, IPSec, OpenVPN, and GRE. Multiple high-encryption methods guarantees the safety of data and facilitates transmission up to financial-level standards.
Wall-mounting and DIN-rail mounting options available
- Two installation methods are free to choose, able to adapt to diverse on-site installation.
- Only one device, one SIM card, one-time installation, once and for all.
- It is convenient and fast, saves time, money and labour, and can be applied in many scenarios.
Diverse applications without fear of complexity
- G809 wireless router provides wireless access to the network
- Provide network for wireless devices, Ethernet devices, sensors, switch control, etc.
- It can also expand network services on more devices through the switch plus serial device server
Smart Agriculture
In the smart agriculture solution involving the 4G industrial router G809, the environmental information collected by sensors is reported to the irrigation system server through the DTU function, and the site location is reported via the GPS data. The liquid level and soil moisture are used to determine if it is necessary to drive the irrigation system to achieve precise irrigation.
Meteorological monitoring case
The smart agricultural meteorological monitoring system, relying on the meteorological stations, collects meteorological data (atmospheric temperature, atmospheric humidity, atmospheric pressure, light intensity, wind speed, precipitation, wind direction, wind speed, etc.) in real time without interruption, and transmits real-time video to the cloud platform in time to form a data report, which fully and intuitively presents the climate status.
Smart store solutions
The IP camera installed in the store sends the real time video to the monitoring center through a wired connection to the 4G industrial router G809. The access control switch and infrared switch are connected to the DI input of the router to check the status
of illegal breaking in, whereas the DO output is used to control the automatic alarm.
These information are sent to the mobile phone of the management personnel in the form of a short message. As a core networking driver, G809 escorts the security of stores.
Specification Parameters
| Cellular Interface | ||
| Antenna | 2x SMA-K Note: North America models: 2 x SMA 4G antenna connectors. | |
| SIM card | 1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots | |
| Ethernet | 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection | 4 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection |
| Indicators | LED | PWR: red, always on after powered on Work: green, blinking when the router is ready and working properly WLAN: green, always solid on when WiFi is enabled and working properly USR: user defined. Net indicator: Red always on after connected to 2G network Green always on after connected to 3G network Orange always on after connected to 4G network Signal strength：3 solid bars, strongest signal |
| Terminal Block | Pinout | V+,V- : 2 cores terminal power supply socket, built-in power supply phase-reversal protection GND: ground terminal Tx/B:RS-232/RS485pin（setupby software） Rx/A:RS-232/RS485pin（setupby software） DI:2 x Digital input,passive switch DO:2 x Digital open collector output, max output 36 V, 300 mA COM: common terminal, use in conjunction with DOs |
| WiFi Interface | ||
| Standards & Frequency | IEEE 802.11b/g/n,2.4GHz, AP mode | |
| Data speed | IEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps | |
| Antenna | 2x RP-SMA-K | |
| Transmission distance | 80 meters by line of sight. Actual transmission distance depends on environment of the site. | |
| Power Supply | ||
| Adaptor | DC 12V/1A | |
| Connector | DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or industrial terminal block, reverse polarity protection | |
| Input voltage | DC 9~36V | |
| Working power | Average 522mA/12V, Maximum 811mA/12V | |
| Serial Interface | ||
| RS485/RS232(alternative) | Industrial terminal block. Note:RS232 default. | |
| Baud rate(bps) | 1200,2400,4800,9600,19200,38400,57600,115200,230400 | |
| Data bits | 8 | |
| Stop bits | 1,2 | |
| Parity | NONE,ODD,EVEN | |
| Housing | Metal shell, IP30 | |
| Dimensions | 125.0*103.0*45.0mm (L*W*H,antenna pedestal,terminal block and DIN Rail are not included) | |
| Installation method | Ear mounting, DIN-Rail mounting | |
| EMC | StaticIEC61000-4-2, level3 Pulsed Electric FieldIEC61000-4-4, level3 SurgeIEC61000-4-5, level3 | |
| Operating temperature | -20℃～+70℃ | |
| Storage temperature | -40℃～+125℃ | |
| Operating humidity | 5%～95%RH（non-condensing） | |
| Others | ||
| Reload | Pinhole button, restore factory defaults/ firmware resume/ firmware upgrading with USB | |
| TBD | Debug interface (TTL Level) | |
| USD | Firmware upgrading | |
| TF | TF card slot | |
| Ground protection | Screw | |
| Embedded Watchdog | Device runs self-detection, auto recovers from malfunctions | |
| Certificate | CE | |
| Software Specifications | ||
| Network Connection | ||
| WAN protocol | PPP, PPPoE, DHCP client | |
| LAN protocol | ARP, DHCP server, NAT，VLAN | |
| 4G network access | Auto APN/VPDN, private network Access authentication: CHAP/PAP | |
| WLAN security | Open system, WPA/WPA2 PSK TKIP/AES encryption | |
| IP routing | Static routing | |
| Network diagnosis | Ping, route trace, DNS | |
| Serial modem | ||
| Work mode | NET, HTTPD | |
| Sockets | 4 sockets, 4centers , TCPS(SOCKA)/TCPC/UDPS/UDPC | |
| Modbus RTU to TCP | Support | |
| DI/DO | Events | SMS, EMAIL |
| Device management | ||
| Configuration | Web | |
| Remote management | SSH, AT command, SNMP, SMS | |
| PUSR platform | Remote monitoring, remote upgrade, alarming, base station location, remote access to web pages of the router | |
| Security | ||
| Failover backup | Failover between 4G and WAN, ensures automatic switch to alternative backup connection | |
| Firewall | DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control | |
| VPN | Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1), OPENVPN protocols | |
| Service | ||
| DDNS | Remotely access the device through domain name | |
| Alarm | Email, SMS, DO | |
| Others | NTP client Timing task USB firmware upgrade User defined indicator |